add cut bitmask option and debug dump support

Replace auto-cut toggle with --cut bit flags (default 011), wire flags through C/Ruby APIs, and document the new cut/debug-dump behavior in both READMEs.

Made-with: Cursor

.gitignore

@@ -1,4 +1,5 @@
 build/
+tmp/
 
 ruby/*.gem
 ruby/.rubocop_cache/

CMakeLists.txt

@@ -27,6 +27,7 @@ set(LIBPTOUCH_SOURCES
 	src/lib/libptouch_usb.c
 	src/lib/libptouch_protocol.c
 	src/lib/libptouch_layout.c
+	src/lib/libptouch_family_config.c
 	src/lib/libptouch_media_info.c
 	src/lib/libptouch_trim.c
 	src/lib/libptouch_print.c
@@ -82,6 +83,8 @@ add_executable(ptouch-protocol-regression-test
 )
 target_include_directories(ptouch-protocol-regression-test PRIVATE
 	"${CMAKE_CURRENT_SOURCE_DIR}/src/lib"
+	"${CMAKE_CURRENT_SOURCE_DIR}/include"
+	"${CMAKE_CURRENT_BINARY_DIR}/include"
 )
 if(NOT MSVC)
 	target_compile_options(ptouch-protocol-regression-test PRIVATE -Wall -Wextra -Wpedantic)
@@ -96,3 +99,6 @@ install(FILES
 	"${CMAKE_CURRENT_SOURCE_DIR}/include/libptouch.h"
 	"${CMAKE_CURRENT_BINARY_DIR}/include/libptouch_version.h"
 	DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}")
+install(FILES
+	"${CMAKE_CURRENT_SOURCE_DIR}/config/printer_families.json"
+	DESTINATION "${CMAKE_INSTALL_DATADIR}/ptouch_label")

README.md

@@ -47,6 +47,8 @@ ctest --test-dir build --output-on-failure
 **SVG**（拡張子 `.svg`）の場合は現在装着中テープの印字可能ドット幅に合わせて自動拡大・縮小します（USB 接続が必要）。  
 `--trim-right[=DOTS]` で右側空白列を削減できます（DOTS 省略時は左余白ドット、取得失敗時は 0）。  
 任意で `-t`（0–255）で二値化しきい値を指定できます。
+`--cut BITS` でカット系フラグを指定できます（`[auto-cut][half-cut][chain-print]`、例 `010`）。  
+指定なしの既定は `011`（オートカットしない / ハーフカットする / つなげて印刷する）です。
 
 **1bit packed ラスター**（行優先、行あたり `ceil(width/8)` バイト × 行数）の場合は `-f` に加え `-w` / `-H` が必須です。
 
@@ -64,6 +66,12 @@ ctest --test-dir build --output-on-failure
 # PNG — しきい値を指定
 ./build/ptouch-print -n -f label.png -t 160
 
+# カットフラグを指定（auto=0, half=1, chain=0）
+./build/ptouch-print -n -f label.png --cut 010
+
+# デバッグ: USB に送る印字データをファイル保存
+./build/ptouch-print -f label.png --debug-dump print_job.bin
+
 # 1bit ラスター — 検証のみ
 ./build/ptouch-print -n -f sample.raster -w 128 -H 64
 
@@ -90,6 +98,7 @@ ctest --test-dir build --output-on-failure
 - `libptouch_get_status` / `libptouch_status_fprint` — ステータス情報リクエスト（ESC i S）の応答
 - `libptouch_get_current_media_info` — 現在テープ幅(mm)・印字可能幅(dots)・DPI・最小余白(mm)を取得
 - `libptouch_check_raster` — ラスターバッファの検証のみ
+- `libptouch_set_debug_dump_path` — USB bulk OUT へ送った印字データをファイル保存（デバッグ用）
 - `libptouch_png_file_to_raster` / `libptouch_free_raster` — PNG を 1bit ラスターに変換（libpng）
 - `libptouch_svg_file_to_raster_fit_current_tape` — SVG を現在テープ幅に合わせて 1bit ラスターへ変換（librsvg + cairo、USB 必須）
 - `libptouch_print_raster` — ラスター印刷（USB・PDF のコマンド列、内部で転置）

config/printer_families.json

@@ -0,0 +1,18 @@
+{
+  "families": {
+    "p700": {
+      "comment": "PT-P750W / PT-P710BT（cv_ptp750w_710bt_jpn_raster_102.pdf 系）",
+      "print_dpi": 180,
+      "margin_feed_dpi": 180,
+      "margin_feed_max_dots": 900,
+      "send_esc_ia_cut_each": false
+    },
+    "p900": {
+      "comment": "PT-P900 / P900W / P950NW / P910BT（cv_ptp900_jpn_raster_102.pdf 系）",
+      "print_dpi": 360,
+      "margin_feed_dpi": 360,
+      "margin_feed_max_dots": 1800,
+      "send_esc_ia_cut_each": true
+    }
+  }
+}

include/libptouch.h

@@ -39,6 +39,18 @@ typedef enum {
 	LIBPTOUCH_ERR_IMAGE = 7,
 } libptouch_err_t;
 
+/**
+ * リファレンス上の系統（PT-P750W/P710BT = P700、PT-P900 系 = P900）。
+ * DPI の値で分岐する代わりに、この系統を使う。
+ */
+typedef enum {
+	LIBPTOUCH_FAMILY_UNKNOWN = 0,
+	/** PT-P750W / PT-P710BT（cv_ptp750w_710bt_jpn_raster_102.pdf 系） */
+	LIBPTOUCH_FAMILY_P700 = 1,
+	/** PT-P900 / P900W / P950NW / P910BT 等（cv_ptp900_jpn_raster_102.pdf 系） */
+	LIBPTOUCH_FAMILY_P900 = 2,
+} libptouch_printer_family_t;
+
 /** lsusb 例: PT-P900W — Brother Industries, Ltd (04f9:2085) */
 #define LIBPTOUCH_USB_VID_BROTHER 0x04f9u
 #define LIBPTOUCH_USB_PID_PTP900W 0x2085u
@@ -49,6 +61,11 @@ typedef enum {
 libptouch_ctx *libptouch_create(void);
 void libptouch_destroy(libptouch_ctx *ctx);
 
+/**
+ * 系統の短い英語ラベル（"p700" / "p900" / "unknown"）。UI やログ用。
+ */
+const char *libptouch_printer_family_label(libptouch_printer_family_t family);
+
 /** 人が読める英語メッセージ（スレッド非安全: ctx ごと） */
 const char *libptouch_strerror(const libptouch_ctx *ctx);
 libptouch_err_t libptouch_last_error(const libptouch_ctx *ctx);
@@ -67,16 +84,39 @@ libptouch_err_t libptouch_open_usb(libptouch_ctx *ctx);
 
 void libptouch_close(libptouch_ctx *ctx);
 
+/**
+ * デバッグ用: USB bulk OUT へ実際に送ったバイト列を path に保存する。
+ * 各 @ref libptouch_print_raster ごとにファイルを上書きし直す（ジョブ先頭のチャンクで wb）。
+ * path が NULL または空文字で無効化。転送が成功したチャンクのみ追記する。
+ */
+void libptouch_set_debug_dump_path(libptouch_ctx *ctx, const char *path);
+
+/** @ref libptouch_raster_params_t.flags 用: ESC i M bit6 でオートカット ON */
+#define LIBPTOUCH_RASTER_FLAG_AUTO_CUT 0x01u
+/** @ref libptouch_raster_params_t.flags 用: ESC i K bit2 でハーフカット ON */
+#define LIBPTOUCH_RASTER_FLAG_HALF_CUT 0x02u
+/** @ref libptouch_raster_params_t.flags 用: ChainPrint する（ESC i K bit3=0） */
+#define LIBPTOUCH_RASTER_FLAG_CHAIN_PRINT 0x04u
+/** 既定: 011（オートカットしない・ハーフカットする・つなげて印刷する） */
+#define LIBPTOUCH_RASTER_FLAGS_DEFAULT                                           \
+	(LIBPTOUCH_RASTER_FLAG_HALF_CUT | LIBPTOUCH_RASTER_FLAG_CHAIN_PRINT)
+
 typedef struct {
-	uint32_t width_dots;  /**< ラスター幅（ドット） */
+	uint32_t width_dots; /**< ラスター幅（ドット） */
 	uint32_t height_dots; /**< ラスター高さ（ドット・走査方向は実装と機種に依存） */
-	uint8_t margin_mm;    /**< 余白など（機種・仕様に合わせて使用） */
+	uint8_t margin_mm;   /**< 余白など（機種・仕様に合わせて使用） */
+	/**
+	 * LIBPTOUCH_RASTER_FLAG_*。未使用ビットは 0。
+	 * 既定は @ref LIBPTOUCH_RASTER_FLAGS_DEFAULT（011: オートカットしない・ハーフカットする・つなげて印刷する）。
+	 */
+	uint8_t flags;
+	uint8_t _reserved[2]; /**< 将来用。0 にすること */
 } libptouch_raster_params_t;
 
 typedef struct {
 	uint8_t media_width_code;   /**< status[10] */
 	uint8_t media_kind_code;    /**< status[11] */
-	double print_dpi;           /**< 印字幅方向 DPI（現状 180 or 360） */
+	double print_dpi;           /**< 印字幅方向 DPI（系統既定または設定ファイル上書き） */
 	double feed_dpi;            /**< 送り方向 DPI（ESC i d の基準） */
 	double tape_width_mm;       /**< 装着テープ幅（mm）。例: 3.5, 6, 9, 12, 18, 24, 36 */
 	uint16_t printable_dots;    /**< 現在テープで印字可能な幅（ドット） */
@@ -84,6 +124,8 @@ typedef struct {
 	uint16_t right_margin_dots; /**< 右余白（ドット） */
 	uint16_t min_feed_dots;     /**< 仕様上の最小送り量（ドット）。現在は 14 */
 	double min_feed_mm;         /**< 最小送り量（mm） */
+	/** @ref libptouch_printer_family_t（系統不明時は @ref LIBPTOUCH_FAMILY_UNKNOWN） */
+	uint32_t printer_family;
 } libptouch_media_info_t;
 
 /**
@@ -113,9 +155,11 @@ libptouch_err_t libptouch_trim_right_blank_columns(
 /**
  * 1 ビット packed ラスターを USB で印刷（各機種のラスター PDF 準拠）。
  * 印字前にステータスでテープ幅を読み、印刷可能ドット内に画像を中央配置する。
- * width_dots は装着テープの印刷可能幅以下であること。PT-P900 系は幅 360dpi、
+ * width_dots は装着テープの印刷可能幅以下であること。系統は @ref libptouch_get_current_media_info
- * PT-P750W / PT-P710BT は幅 180dpi（cv_ptp750w_710bt_jpn_raster_102.pdf）のドット列を想定。
+ * の printer_family で判別できる（P900 系は主に 360dpi 相当ドット列、P700 系は 180dpi 相当）。
  * @param margin_mm 余白（フィード）量。0 のとき PDF の最小 1mm（14 ドット）相当を送る。
+ * @param params->flags bit0=オートカット、bit1=ハーフカット、bit2=チェーンプリントする。
+ *        指定なしは @ref LIBPTOUCH_RASTER_FLAGS_DEFAULT（011）。
  * 印刷時は内部でドット列を転置する（テープ幅方向とバッファの縦横の対応）。
  * @param data 1 行あたり width_dots ビットを ceil(width_dots/8) バイトで並べた連続領域
  * @param data_len 期待値: height * row_bytes, row_bytes = (width_dots + 7) / 8

reference/ptp_raster_ref.adoc

@@ -0,0 +1,14 @@
+= P-Toouch Raster コマンド リファレンスメモ
+
+== 印字データ
+
+印刷データは大きく分けて、初期化コマンド、制御コード、ラスターデータ、印字指令から構成される。
+ジョブが複数ページからなる場合には、制御コード～ラスターデータを繰り返します。
+
+=== 初期化コマンド
+
+印刷開始時に一度送信
+
+1. 無効指令: NULL(0x00) × 200バイト
+2. 初期化: ESC @ (0x1B 0x40)
+

ruby/Gemfile.lock

@@ -1,14 +1,18 @@
 PATH
   remote: .
   specs:
-    libptouch (1.0.0)
+    libptouch (1.0.1)
+      barby
       ffi (~> 1.15)
       rexml
+      rqrcode
 
 GEM
   remote: https://rubygems.org/
   specs:
     ast (2.4.3)
+    barby (0.7.0)
+    chunky_png (1.4.0)
     ffi (1.17.4)
     ffi (1.17.4-aarch64-linux-gnu)
     ffi (1.17.4-aarch64-linux-musl)
@@ -32,6 +36,10 @@ GEM
     rainbow (3.1.1)
     regexp_parser (2.12.0)
     rexml (3.4.4)
+    rqrcode (3.2.0)
+      chunky_png (~> 1.0)
+      rqrcode_core (~> 2.0)
+    rqrcode_core (2.1.0)
     rubocop (1.86.1)
       json (~> 2.3)
       language_server-protocol (~> 3.17.0.2)
@@ -70,6 +78,8 @@ DEPENDENCIES
 
 CHECKSUMS
   ast (2.4.3) sha256=954615157c1d6a382bc27d690d973195e79db7f55e9765ac7c481c60bdb4d383
+  barby (0.7.0) sha256=8dbc7c0c320e596135d97929c0df77f969e9f9c955a157cf6749c05b44dae213
+  chunky_png (1.4.0) sha256=89d5b31b55c0cf4da3cf89a2b4ebc3178d8abe8cbaf116a1dba95668502fdcfe
   ffi (1.17.4) sha256=bcd1642e06f0d16fc9e09ac6d49c3a7298b9789bcb58127302f934e437d60acf
   ffi (1.17.4-aarch64-linux-gnu) sha256=b208f06f91ffd8f5e1193da3cae3d2ccfc27fc36fba577baf698d26d91c080df
   ffi (1.17.4-aarch64-linux-musl) sha256=9286b7a615f2676245283aef0a0a3b475ae3aae2bb5448baace630bb77b91f39
@@ -83,7 +93,7 @@ CHECKSUMS
   ffi (1.17.4-x86_64-linux-musl) sha256=3fdf9888483de005f8ef8d1cf2d3b20d86626af206cbf780f6a6a12439a9c49e
   json (2.19.3) sha256=289b0bb53052a1fa8c34ab33cc750b659ba14a5c45f3fcf4b18762dc67c78646
   language_server-protocol (3.17.0.5) sha256=fd1e39a51a28bf3eec959379985a72e296e9f9acfce46f6a79d31ca8760803cc
-  libptouch (1.0.0)
+  libptouch (1.0.1)
   lint_roller (1.1.0) sha256=2c0c845b632a7d172cb849cc90c1bce937a28c5c8ccccb50dfd46a485003cc87
   parallel (2.0.1) sha256=337782d3e39f4121e67563bf91dd8ece67f48923d90698614773a0ec9a5b2c7d
   parser (3.3.11.1) sha256=d17ace7aabe3e72c3cc94043714be27cc6f852f104d81aa284c2281aecc65d54
@@ -92,6 +102,8 @@ CHECKSUMS
   rainbow (3.1.1) sha256=039491aa3a89f42efa1d6dec2fc4e62ede96eb6acd95e52f1ad581182b79bc6a
   regexp_parser (2.12.0) sha256=35a916a1d63190ab5c9009457136ae5f3c0c7512d60291d0d1378ba18ce08ebb
   rexml (3.4.4) sha256=19e0a2c3425dfbf2d4fc1189747bdb2f849b6c5e74180401b15734bc97b5d142
+  rqrcode (3.2.0) sha256=64c1494ca6bb67d731330f38b50e3fd09eeab4f5dcd04b608e21218d1d0b9542
+  rqrcode_core (2.1.0) sha256=f303b85df89c1b8fc5ee8dc19808c9dc4330e6329b660d99d4a8cbb36ca13051
   rubocop (1.86.1) sha256=44415f3f01d01a21e01132248d2fd0867572475b566ca188a0a42133a08d4531
   rubocop-ast (1.49.1) sha256=4412f3ee70f6fe4546cc489548e0f6fcf76cafcfa80fa03af67098ffed755035
   ruby-progressbar (1.13.0) sha256=80fc9c47a9b640d6834e0dc7b3c94c9df37f08cb072b7761e4a71e22cff29b33

ruby/README.md

@@ -37,7 +37,10 @@ SVG は現在装着テープの印字可能幅に合わせて自動拡大・縮
 
 オプションは C 側に合わせ、`**-p` / `--pid`** で USB 製品 ID（16 進可）を指定できます。省略時は PT-P900W（`Libptouch::USB_PID_PTP900W` = `0x2085`）。例: PT-P750W `0x2062`、PT-P710BT `0x20af`（`libptouch.h` / `Libptouch` 定数と同じ）。
 また、`--template`（SVG）と `--data`（JSON/YAML）を使うと `data-field` 属性をキーにした差込印刷が可能です。
+`data-kb-placeholder="qr"` / `data-kb-placeholder="barcode"` を付けた SVG 要素（`x/y/width/height` 必須）には、対応する `data-field` 値から QR / Code128 バーコードを生成して差し込みできます。
 `--trim-right[=DOTS]` を付けると、libptouch 側の共通処理でラベル右側の空白ドット列を削減します。`DOTS` 省略時は左余白ドット数を使い、取得失敗時は `0` にフォールバックします。
+`--cut BITS` は 3bit（`[auto-cut][half-cut][chain-print]`）で、例 `010` のように指定します。既定は `011` です。
+`--debug-dump PATH` を付けると USB へ送る印字データをファイル保存します（1 印刷ごとに上書き）。
 
 開発ツリーからそのまま試す例:
 
@@ -47,6 +50,8 @@ bundle exec ruby -I lib exe/ptouch-label -n -f ../samples/your.png
 bundle exec ruby -I lib exe/ptouch-label -n -f ../samples/your.svg
 bundle exec ruby -I lib exe/ptouch-label -n -f ../samples/your.svg --trim-right
 bundle exec ruby -I lib exe/ptouch-label -n -f ../samples/your.svg --trim-right=20
+bundle exec ruby -I lib exe/ptouch-label -n -f ../samples/your.png --cut 010
+bundle exec ruby -I lib exe/ptouch-label -f ../samples/your.png --debug-dump print_job.bin
 bundle exec ruby -I lib exe/ptouch-label -n --template ../samples/your_template.svg --data ../samples/your_data.yml
 bundle exec ruby -I lib exe/ptouch-label --media-info
 bundle exec ruby -I lib exe/ptouch-label --status -p 0x2062
@@ -97,7 +102,7 @@ ctx.dispose
 
 ## API の範囲
 
-- 実行ファイル `ptouch-label`（互換: `ptouch-print-png`）… PNG/SVG（`-f`, `-t`, `-p`, `-n`, `-M`, `-S`, `-V`, `-h`, `--template`, `--data`, `--trim-right[=DOTS]`）。`-M` は現在テープ情報（幅 mm・DPI 等）を JSON 出力、`-S` はステータス JSON 出力、`--trim-right` は右側空白列を削減
+- 実行ファイル `ptouch-label`（互換: `ptouch-print-png`）… PNG/SVG（`-f`, `-t`, `-p`, `-n`, `-M`, `-S`, `-V`, `-h`, `--template`, `--data`, `--trim-right[=DOTS]`, `--cut BITS`, `--debug-dump PATH`）。`-M` は現在テープ情報（幅 mm・DPI 等）を JSON 出力、`-S` はステータス JSON 出力、`--trim-right` は右側空白列を削減
 - `Libptouch::Context` … `open_usb` / `open_usb_vid_pid` / `close` / `dispose`
 - `check_raster` / `print_raster` / `png_file_to_raster` / `svg_file_to_raster_fit_current_tape` / `status_bytes` / `status_hash` / `current_media_info`
 - `current_media_info` には `print_dpi` / `feed_dpi` / `tape_width_mm` / `printable_height_dots` / `min_feed_mm` などを含む（テープ幅方向は `printable_height_dots`）

ruby/lib/libptouch.rb

@@ -27,4 +27,14 @@ module Libptouch
 
   STATUS_LENGTH = 32
   PNG_DEFAULT_THRESHOLD = 128
+
+  # libptouch_printer_family_t（C API と同じ値）
+  FAMILY_UNKNOWN = 0
+  FAMILY_P700 = 1
+  FAMILY_P900 = 2
+
+  RASTER_FLAG_AUTO_CUT = 0x01
+  RASTER_FLAG_HALF_CUT = 0x02
+  RASTER_FLAG_CHAIN_PRINT = 0x04
+  RASTER_FLAGS_DEFAULT = RASTER_FLAG_HALF_CUT | RASTER_FLAG_CHAIN_PRINT
 end

ruby/lib/libptouch/binding.rb

@@ -25,7 +25,9 @@ module Libptouch
       layout :width_dots, :uint32,
              :height_dots, :uint32,
              :margin_mm, :uint8,
-             :_pad, [:uint8, 3]
+             :flags, :uint8,
+             :reserved0, :uint8,
+             :reserved1, :uint8
     end
 
     class MediaInfo < FFI::Struct
@@ -39,7 +41,8 @@ module Libptouch
              :left_margin_dots, :uint16,
              :right_margin_dots, :uint16,
              :min_feed_dots, :uint16,
-             :min_feed_mm, :double
+             :min_feed_mm, :double,
+             :printer_family, :uint32
     end
 
     class PngOptions < FFI::Struct
@@ -51,6 +54,8 @@ module Libptouch
     end
 
     attach_function :libptouch_create, [], :pointer
+    attach_function :libptouch_set_debug_dump_path, %i[pointer string], :void
+    attach_function :libptouch_printer_family_label, [:uint32], :string
     attach_function :libptouch_destroy, [:pointer], :void
     attach_function :libptouch_strerror, [:pointer], :string
     attach_function :libptouch_last_error, [:pointer], :int

ruby/lib/libptouch/cli/label_print.rb

@@ -2,9 +2,13 @@
 
 require "json"
 require "optparse"
+require "rqrcode"
 require "rexml/document"
 require "tempfile"
 require "yaml"
+require "barby"
+require "barby/barcode/code_128"
+require "barby/outputter/svg_outputter"
 
 require "libptouch"
 
@@ -72,8 +76,10 @@ module Libptouch
         return nil unless threshold_option_ok?(opts_hash)
         return nil unless trim_right_option_ok?(opts_hash)
         return nil unless usb_pid_option_ok?(opts_hash)
+        return nil if opts_hash[:cut_invalid]
 
         opts_hash.delete(:usb_pid_invalid)
+        opts_hash.delete(:cut_invalid)
         opts_hash
       end
 
@@ -90,7 +96,9 @@ module Libptouch
           media_info: false,
           status: false,
           version: false,
-          help: false
+          help: false,
+          cut_flags: Libptouch::RASTER_FLAGS_DEFAULT,
+          debug_dump: nil
         }
       end
 
@@ -134,6 +142,19 @@ module Libptouch
         false
       end
 
+      def apply_cut_option(opts_hash, bits)
+        unless bits.is_a?(String) && bits.match?(/\A[01]{3}\z/)
+          warn "--cut must be 3 bits (e.g. 010: auto/half/chain)"
+          opts_hash[:cut_invalid] = true
+          return
+        end
+        flags = 0
+        flags |= Libptouch::RASTER_FLAG_AUTO_CUT if bits[0] == "1"
+        flags |= Libptouch::RASTER_FLAG_HALF_CUT if bits[1] == "1"
+        flags |= Libptouch::RASTER_FLAG_CHAIN_PRINT if bits[2] == "1"
+        opts_hash[:cut_flags] = flags
+      end
+
       def build_cli_parser(opts_hash)
         OptionParser.new do |p|
           p.banner = usage_banner
@@ -148,6 +169,12 @@ module Libptouch
           p.on("-p", "--pid PID", pid_option_description) do |v|
             apply_usb_pid_option(opts_hash, v)
           end
+          p.on("--cut BITS", "3bit: [auto][half][chain]。既定 011") do |v|
+            apply_cut_option(opts_hash, v)
+          end
+          p.on("--debug-dump PATH", "デバッグ: 印字バイト列を PATH に保存（1 印刷ごとに上書き）") do |v|
+            opts_hash[:debug_dump] = v
+          end
           p.on("-n", "--dry-run", "読み込みと検証のみ（USB なし）") { opts_hash[:dry_run] = true }
           p.on("--trim-right[=DOTS]", Integer,
                "右側空白を削減。DOTS省略時は左余白（失敗時 0）") do |v|
@@ -208,6 +235,12 @@ module Libptouch
           parser.on("-p", "--pid PID", pid_option_description) do |v|
             apply_usb_pid_option(opts_hash, v)
           end
+          parser.on("--cut BITS", "3bit: [auto][half][chain]。既定 011") do |v|
+            apply_cut_option(opts_hash, v)
+          end
+          parser.on("--debug-dump PATH", "印字バイト列を PATH に保存") do |v|
+            opts_hash[:debug_dump] = v
+          end
           parser.on("-n", "--dry-run", "読み込みと検証のみ（USB なし）") { opts_hash[:dry_run] = true }
           parser.on("--trim-right[=DOTS]", Integer,
                     "右側空白を削減。DOTS省略時は左余白（失敗時 0）") do |v|
@@ -289,12 +322,155 @@ module Libptouch
 
           replace_text_element_content(el, data[key].to_s)
         end
+        replace_code_placeholders(doc, data)
         out = +""
         formatter = REXML::Formatters::Default.new
         formatter.write(doc, out)
         out
       end
 
+      def replace_code_placeholders(doc, data)
+        doc.elements.each("//*[@data-field][@data-kb-placeholder]") do |el|
+          key = el.attributes["data-field"].to_s
+          next unless data.key?(key)
+
+          kind = el.attributes["data-kb-placeholder"].to_s.downcase
+          next unless %w[qr barcode].include?(kind)
+
+          x, y, width, height = read_box(el)
+          next if width <= 0 || height <= 0
+
+          raw_value = data[key].to_s
+          next if raw_value.empty?
+
+          replacement = build_code_svg_element(
+            kind: kind,
+            value: raw_value,
+            x: x,
+            y: y,
+            width: width,
+            height: height
+          )
+          el.parent&.insert_after(el, replacement)
+          el.parent&.delete(el)
+        end
+      end
+
+      def read_box(el)
+        x = el.attributes["x"].to_s.to_f
+        y = el.attributes["y"].to_s.to_f
+        width = el.attributes["width"].to_s.to_f
+        height = el.attributes["height"].to_s.to_f
+        [x, y, width, height]
+      end
+
+      def build_code_svg_element(kind:, value:, x:, y:, width:, height:)
+        svg_fragment =
+          if kind == "qr"
+            render_qr_svg(value)
+          else
+            render_barcode_svg(value)
+          end
+        fragment_doc = REXML::Document.new(strip_xml_declaration(svg_fragment))
+        svg_root = fragment_doc.root
+        svg_root = wrap_non_svg_root(svg_root) unless svg_root&.name == "svg"
+
+        if kind == "qr"
+          apply_qr_svg_box(svg_root, x: x, y: y, width: width, height: height)
+        else
+          apply_barcode_svg_box(svg_root, x: x, y: y, height: height)
+        end
+        svg_root
+      end
+
+      def apply_qr_svg_box(svg_root, x:, y:, width:, height:)
+        nat_w, nat_h = svg_natural_dimensions(svg_root)
+        if nat_w <= 0 || nat_h <= 0
+          nat_w = parse_length_attr(svg_root.attributes["width"])
+          nat_h = parse_length_attr(svg_root.attributes["height"])
+        end
+        raise ArgumentError, "QR SVG has no usable dimensions" if nat_w <= 0 || nat_h <= 0
+
+        svg_root.attributes["viewBox"] = "0 0 #{nat_w} #{nat_h}"
+        svg_root.attributes["x"] = x.to_s
+        svg_root.attributes["y"] = y.to_s
+        svg_root.attributes["width"] = width.to_s
+        svg_root.attributes["height"] = height.to_s
+        svg_root.attributes["preserveAspectRatio"] = "xMidYMid meet"
+      end
+
+      def apply_barcode_svg_box(svg_root, x:, y:, height:)
+        nat_w, nat_h = svg_natural_dimensions(svg_root)
+        if nat_w <= 0 || nat_h <= 0
+          nat_w = parse_length_attr(svg_root.attributes["width"])
+          nat_h = parse_length_attr(svg_root.attributes["height"])
+        end
+        raise ArgumentError, "barcode SVG has no usable dimensions" if nat_w <= 0 || nat_h <= 0
+
+        scale = height / nat_h
+        out_w = nat_w * scale
+        out_h = nat_h * scale
+
+        svg_root.attributes["viewBox"] = "0 0 #{nat_w} #{nat_h}"
+        svg_root.attributes["x"] = x.to_s
+        svg_root.attributes["y"] = y.to_s
+        svg_root.attributes["width"] = out_w.to_s
+        svg_root.attributes["height"] = out_h.to_s
+        svg_root.attributes["preserveAspectRatio"] = "xMidYMid meet"
+      end
+
+      def strip_xml_declaration(s)
+        s.to_s.sub(/\A<\?xml[^>]*\?>\s*/m, "")
+      end
+
+      def svg_natural_dimensions(svg_root)
+        vb = svg_root.attributes["viewBox"].to_s.strip
+        if (m = /\A\s*([-\d.eE+]+)\s+([-\d.eE+]+)\s+([-\d.eE+]+)\s+([-\d.eE+]+)\s*\z/.match(vb))
+          return [m[3].to_f, m[4].to_f]
+        end
+
+        [parse_length_attr(svg_root.attributes["width"]),
+         parse_length_attr(svg_root.attributes["height"])]
+      end
+
+      def parse_length_attr(str)
+        s = str.to_s.strip
+        return 0.0 if s.empty?
+
+        s = s.delete_suffix("px").strip
+        Float(s)
+      rescue ArgumentError
+        0.0
+      end
+
+      def render_qr_svg(value)
+        qrcode = RQRCode::QRCode.new(value)
+        qrcode.as_svg(
+          standalone: true,
+          use_path: true,
+          module_size: 1,
+          offset: 0,
+          color: "000",
+          shape_rendering: "crispEdges"
+        )
+      end
+
+      def render_barcode_svg(value)
+        barcode = Barby::Code128B.new(value)
+        Barby::SvgOutputter.new(barcode).to_svg(
+          xdim: 2,
+          height: 64,
+          margin: 0
+        )
+      end
+
+      def wrap_non_svg_root(root)
+        svg = REXML::Element.new("svg")
+        svg.add_namespace("http://www.w3.org/2000/svg")
+        svg.add_element(root)
+        svg
+      end
+
       def replace_text_element_content(text_element, value)
         # Remove all child nodes first so mixed content (<tspan>, text nodes, etc.)
         # gets replaced consistently by merge data.
@@ -339,6 +515,7 @@ module Libptouch
         ctx = nil
         begin
           ctx = Libptouch::Context.new
+          ctx.debug_dump_path = opts[:debug_dump] if opts[:debug_dump]
           usb_opened = false
           threshold = opts[:threshold]
           data, width, height = if kind == :svg
@@ -361,11 +538,13 @@ module Libptouch
               data,
               width_dots: width,
               height_dots: height,
-              right_padding_dots: trim_pad
+              right_padding_dots: trim_pad,
+              cut_flags: opts[:cut_flags]
             )
           end
 
-          ctx.check_raster(data, width_dots: width, height_dots: height)
+          ctx.check_raster(data, width_dots: width, height_dots: height,
+                           cut_flags: opts[:cut_flags])
 
           if opts[:dry_run]
             puts "dry-run OK: #{data.bytesize} bytes, src #{width}x#{height} dots (print lengthxwidth #{width}x#{height})"
@@ -373,7 +552,8 @@ module Libptouch
           end
 
           open_usb_for_opts(ctx, opts) if kind == :png && !usb_opened
-          ctx.print_raster(data, width_dots: width, height_dots: height)
+          ctx.print_raster(data, width_dots: width, height_dots: height,
+                           cut_flags: opts[:cut_flags])
           0
         rescue Libptouch::Error => e
           warn e.message

ruby/lib/libptouch/context.rb

@@ -36,6 +36,11 @@ module Libptouch
       self
     end
 
+    def debug_dump_path=(path)
+      Binding.libptouch_set_debug_dump_path(@native, path.nil? || path.to_s.empty? ? nil : path.to_s)
+      self
+    end
+
     def close
       Binding.libptouch_close(@native) if @native && !@native.null?
       self
@@ -47,11 +52,14 @@ module Libptouch
       @native = nil
     end
 
-    def check_raster(data, width_dots:, height_dots:, margin_mm: 0)
+    def check_raster(data, width_dots:, height_dots:, margin_mm: 0, cut_flags: RASTER_FLAGS_DEFAULT)
       params = Binding::RasterParams.new
       params[:width_dots] = width_dots
       params[:height_dots] = height_dots
       params[:margin_mm] = margin_mm
+      params[:flags] = cut_flags
+      params[:reserved0] = 0
+      params[:reserved1] = 0
       buf = FFI::MemoryPointer.new(:uint8, data.bytesize)
       buf.put_bytes(0, data)
       raise_on_error(Binding.libptouch_check_raster(@native, buf, data.bytesize,
@@ -59,11 +67,14 @@ module Libptouch
       self
     end
 
-    def print_raster(data, width_dots:, height_dots:, margin_mm: 0)
+    def print_raster(data, width_dots:, height_dots:, margin_mm: 0, cut_flags: RASTER_FLAGS_DEFAULT)
       params = Binding::RasterParams.new
       params[:width_dots] = width_dots
       params[:height_dots] = height_dots
       params[:margin_mm] = margin_mm
+      params[:flags] = cut_flags
+      params[:reserved0] = 0
+      params[:reserved1] = 0
       buf = FFI::MemoryPointer.new(:uint8, data.bytesize)
       buf.put_bytes(0, data)
       raise_on_error(Binding.libptouch_print_raster(@native, buf, data.bytesize,
@@ -115,11 +126,15 @@ module Libptouch
       [bytes, out_params[:width_dots], out_params[:height_dots]]
     end
 
-    def trim_right_blank_columns(data, width_dots:, height_dots:, margin_mm: 0, right_padding_dots: 0)
+    def trim_right_blank_columns(data, width_dots:, height_dots:, margin_mm: 0,
+                                 right_padding_dots: 0, cut_flags: RASTER_FLAGS_DEFAULT)
       in_params = Binding::RasterParams.new
       in_params[:width_dots] = width_dots
       in_params[:height_dots] = height_dots
       in_params[:margin_mm] = margin_mm
+      in_params[:flags] = cut_flags
+      in_params[:reserved0] = 0
+      in_params[:reserved1] = 0
       in_buf = FFI::MemoryPointer.new(:uint8, data.bytesize)
       in_buf.put_bytes(0, data)
       out_pp = FFI::MemoryPointer.new(:pointer)
@@ -151,6 +166,7 @@ module Libptouch
     def current_media_info
       info = Binding::MediaInfo.new
       raise_on_error(Binding.libptouch_get_current_media_info(@native, info.pointer))
+      fam = info[:printer_family]
       {
         media_width_code: info[:media_width_code],
         media_kind_code: info[:media_kind_code],
@@ -161,7 +177,9 @@ module Libptouch
         left_margin_dots: info[:left_margin_dots],
         right_margin_dots: info[:right_margin_dots],
         min_feed_dots: info[:min_feed_dots],
-        min_feed_mm: info[:min_feed_mm]
+        min_feed_mm: info[:min_feed_mm],
+        printer_family: fam,
+        printer_family_label: Binding.libptouch_printer_family_label(fam)
       }
     end
   end

ruby/libptouch.gemspec

@@ -29,5 +29,7 @@ Gem::Specification.new do |spec|
   spec.require_paths = ["lib"]
 
   spec.add_dependency "ffi", "~> 1.15"
+  spec.add_dependency "barby"
+  spec.add_dependency "rqrcode"
   spec.add_dependency "rexml"
 end

samples/README.md

@@ -13,4 +13,5 @@
 ```bash
 ruby -I ruby/lib ruby/exe/ptouch-label -n --template samples/merge_template.svg --data samples/merge_data.yml
 ruby -I ruby/lib ruby/exe/ptouch-label -n --template samples/merge_template.svg --data samples/merge_data.json
+ruby -I ruby/lib ruby/exe/ptouch-label -n --template samples/code.svg --data samples/code.yml
 ```

samples/code.svg

@@ -0,0 +1,7 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 36" width="100mm" height="36mm">
+<rect x="0.25" y="0.25" width="99.75" height="35.75" fill="#ffffff" stroke="#000000" stroke-width="0.25"/>
+<text x="2" y="7" font-size="4.5" fill="#000000" font-family="sans-serif" data-field="itemName">サンプル備品</text>
+<text x="2" y="14" font-size="3.2" fill="#000000" font-family="sans-serif" data-field="model">KB-001</text>
+<rect x="78" y="3" width="18.25" height="18.25" fill="none" stroke="#000000" stroke-width="0.25" stroke-dasharray="1 0.8" data-field="qrText" data-kb-placeholder="qr"/>
+<rect x="8" y="24" width="72.25" height="8.25" fill="none" stroke="#000000" stroke-width="0.25" stroke-dasharray="1 0.6" data-field="barcodeText" data-kb-placeholder="barcode"/>
+</svg>

samples/code.yml

@@ -0,0 +1,4 @@
+itemName: "サンプル備品 001"
+model: "KB-002"
+qrText: "https://wwww.artif.org"
+barcodeText: "KB001"

src/cli/main.c

@@ -27,6 +27,9 @@ static void usage(const char *argv0)
 		"  -n, --dry-run       読み込みと check_raster のみ（USB なし）\n"
 		"  -v, --verbose       印刷前情報と印刷後ステータスを標準出力\n"
 		"  -p, --pid HEX       USB 製品 ID（既定: P900W の 0x2085）。例: P750W 0x2062、P710BT 0x20af\n"
+		"      --cut BITS      3bit 指定: [auto-cut][half-cut][chain-print] (例: 010)\n"
+		"                      既定: 011（オートカットしない、ハーフカットする、つなげて印刷する）\n"
+		"      --debug-dump PATH  デバッグ: USB に送った印字データをファイルへ保存（1 印刷ごとに上書き）\n"
 		"  -S, --status        ステータスを表示して終了\n"
 		"  -V, --version       バージョンを表示して終了\n"
 		"  -h, --help          このヘルプ\n"
@@ -103,6 +106,25 @@ static int read_file(const char *path, uint8_t **out, size_t *out_len)
 	return 0;
 }
 
+static int parse_cut_bits(const char *s, uint8_t *out_flags)
+{
+	if (!s || strlen(s) != 3u)
+		return -1;
+	for (int i = 0; i < 3; i++) {
+		if (s[i] != '0' && s[i] != '1')
+			return -1;
+	}
+	uint8_t flags = 0u;
+	if (s[0] == '1')
+		flags |= LIBPTOUCH_RASTER_FLAG_AUTO_CUT;
+	if (s[1] == '1')
+		flags |= LIBPTOUCH_RASTER_FLAG_HALF_CUT;
+	if (s[2] == '1')
+		flags |= LIBPTOUCH_RASTER_FLAG_CHAIN_PRINT;
+	*out_flags = flags;
+	return 0;
+}
+
 static void verbose_print_pre_print_info(libptouch_ctx *ctx,
 					 const libptouch_raster_params_t *params,
 					 size_t data_len)
@@ -115,6 +137,11 @@ static void verbose_print_pre_print_info(libptouch_ctx *ctx,
 	printf("raster size: %ux%u dots (length x width)\n",
 	       (unsigned)params->width_dots, (unsigned)params->height_dots);
 	printf("margin_mm: %u\n", (unsigned)params->margin_mm);
+	printf("raster flags: 0x%02X (auto-cut %s, half-cut %s, chain-print %s)\n",
+	       (unsigned)params->flags,
+	       (params->flags & LIBPTOUCH_RASTER_FLAG_AUTO_CUT) ? "on" : "off",
+	       (params->flags & LIBPTOUCH_RASTER_FLAG_HALF_CUT) ? "on" : "off",
+	       (params->flags & LIBPTOUCH_RASTER_FLAG_CHAIN_PRINT) ? "on" : "off");
 
 	libptouch_media_info_t mi;
 	if (libptouch_get_current_media_info(ctx, &mi) == LIBPTOUCH_OK) {
@@ -124,6 +151,10 @@ static void verbose_print_pre_print_info(libptouch_ctx *ctx,
 		printf("printable dots: %u\n", (unsigned)mi.printable_dots);
 		printf("left/right margins: %u/%u dots\n",
 		       (unsigned)mi.left_margin_dots, (unsigned)mi.right_margin_dots);
+		printf("printer family: %s (%u)\n",
+		       libptouch_printer_family_label(
+			       (libptouch_printer_family_t)mi.printer_family),
+		       (unsigned)mi.printer_family);
 		printf("print/feed dpi: %.1f/%.1f\n", mi.print_dpi, mi.feed_dpi);
 	} else {
 		printf("media info: unavailable (%s)\n", libptouch_strerror(ctx));
@@ -179,6 +210,8 @@ int main(int argc, char **argv)
 	unsigned trim_right_dots = 0;
 	int has_threshold = 0;
 	int want_status = 0;
+	uint8_t cut_flags = LIBPTOUCH_RASTER_FLAGS_DEFAULT;
+	const char *debug_dump_path = NULL;
 	static struct option longopts[] = {
 		{ "width", required_argument, NULL, 'w' },
 		{ "height", required_argument, NULL, 'H' },
@@ -191,6 +224,8 @@ int main(int argc, char **argv)
 		{ "status", no_argument, NULL, 'S' },
 		{ "version", no_argument, NULL, 'V' },
 		{ "help", no_argument, NULL, 'h' },
+		{ "cut", required_argument, NULL, 1000 },
+		{ "debug-dump", required_argument, NULL, 1001 },
 		{ NULL, 0, NULL, 0 },
 	};
 
@@ -242,6 +277,16 @@ int main(int argc, char **argv)
 				return 2;
 			}
 			break;
+		case 1000:
+			if (parse_cut_bits(optarg, &cut_flags) != 0) {
+				fprintf(stderr,
+					"--cut must be 3 bits (e.g. 010: auto/half/chain)\n");
+				return 2;
+			}
+			break;
+		case 1001:
+			debug_dump_path = optarg;
+			break;
 		case 'S':
 			want_status = 1;
 			break;
@@ -325,10 +370,12 @@ int main(int argc, char **argv)
 		fprintf(stderr, "libptouch_create failed\n");
 		return 1;
 	}
+	if (debug_dump_path)
+		libptouch_set_debug_dump_path(ctx, debug_dump_path);
 
 	uint8_t *data = NULL;
 	size_t data_len = 0;
-	libptouch_raster_params_t params = { 0, 0, 0 };
+	libptouch_raster_params_t params = { 0 };
 	libptouch_err_t e;
 	int usb_opened = 0;
 	int data_from_lib = 0;
@@ -402,7 +449,7 @@ int main(int argc, char **argv)
 
 		uint8_t *trimmed = NULL;
 		size_t trimmed_len = 0;
-		libptouch_raster_params_t trimmed_params = { 0, 0, 0 };
+		libptouch_raster_params_t trimmed_params = { 0 };
 		e = libptouch_trim_right_blank_columns(
 			ctx, data, data_len, &params, pad, &trimmed, &trimmed_len,
 			&trimmed_params);
@@ -426,6 +473,10 @@ int main(int argc, char **argv)
 		data_from_lib = 1;
 	}
 
+	params.flags = cut_flags;
+	params._reserved[0] = 0u;
+	params._reserved[1] = 0u;
+
 	e = libptouch_check_raster(ctx, data, data_len, &params);
 	if (e != LIBPTOUCH_OK) {
 		fprintf(stderr, "check_raster: %s\n",

src/lib/libptouch_core.c

@@ -6,6 +6,7 @@
  */
 
 #include "libptouch_internal.h"
+#include "libptouch_family_config.h"
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -33,6 +34,8 @@ void ptouch_set_error_usb(libptouch_ctx *ctx, int libusb_err, const char *what)
 
 libptouch_ctx *libptouch_create(void)
 {
+	ptouch_family_config_init_once();
+
 	libptouch_ctx *ctx = calloc(1, sizeof(*ctx));
 	if (!ctx)
 		return NULL;
@@ -52,9 +55,29 @@ void libptouch_destroy(libptouch_ctx *ctx)
 	if (!ctx)
 		return;
 	libptouch_close(ctx);
+	free(ctx->debug_dump_path);
 	free(ctx);
 }
 
+void libptouch_set_debug_dump_path(libptouch_ctx *ctx, const char *path)
+{
+	if (!ctx)
+		return;
+	free(ctx->debug_dump_path);
+	ctx->debug_dump_path = NULL;
+	ctx->debug_dump_truncate_next = 0;
+	if (!path || !path[0])
+		return;
+	ctx->debug_dump_path = strdup(path);
+}
+
+void ptouch_debug_dump_begin_print_job(libptouch_ctx *ctx)
+{
+	if (!ctx)
+		return;
+	ctx->debug_dump_truncate_next = 1;
+}
+
 const char *libptouch_strerror(const libptouch_ctx *ctx)
 {
 	if (!ctx)

src/lib/libptouch_family_config.c

@@ -0,0 +1,302 @@
+/*
+ * libptouch — optional JSON overrides for P700/P900 family parameters
+ *
+ * 検索順: 環境変数 LIBPTOUCH_CONFIG、カレントの printer_families.json、
+ *         config/printer_families.json（リポジトリ配置用）
+ */
+
+#include "libptouch_family_config.h"
+
+#include <ctype.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+enum {
+	OV_PRINT_DPI = 1 << 0,
+	OV_MARGIN_FEED_DPI = 1 << 1,
+	OV_MARGIN_MAX = 1 << 2,
+	OV_ESC_IA = 1 << 3,
+};
+
+typedef struct {
+	unsigned mask;
+	double print_dpi;
+	double margin_feed_dpi;
+	unsigned margin_feed_max_dots;
+	int send_esc_ia;
+} family_override_t;
+
+static family_override_t g_p700;
+static family_override_t g_p900;
+static int g_loaded;
+
+static const char *skip_ws(const char *p)
+{
+	while (*p == ' ' || *p == '\t' || *p == '\n' || *p == '\r')
+		p++;
+	return p;
+}
+
+static int read_file_all(const char *path, char **out, size_t *out_len)
+{
+	FILE *fp = fopen(path, "rb");
+	if (!fp)
+		return -1;
+	if (fseek(fp, 0, SEEK_END) != 0) {
+		fclose(fp);
+		return -1;
+	}
+	long sz = ftell(fp);
+	if (sz < 0 || sz > 65536) {
+		fclose(fp);
+		return -1;
+	}
+	rewind(fp);
+	char *buf = (char *)malloc((size_t)sz + 1u);
+	if (!buf) {
+		fclose(fp);
+		return -1;
+	}
+	size_t n = fread(buf, 1, (size_t)sz, fp);
+	fclose(fp);
+	buf[n] = '\0';
+	*out = buf;
+	*out_len = n;
+	return 0;
+}
+
+static const char *find_quoted_key(const char *json, const char *key)
+{
+	char pat[48];
+	snprintf(pat, sizeof(pat), "\"%s\"", key);
+	return strstr(json, pat);
+}
+
+static int extract_object_after_key(const char *json, const char *key,
+				    char *out, size_t out_sz)
+{
+	const char *p = find_quoted_key(json, key);
+	if (!p)
+		return -1;
+	p += strlen(key) + 2u;
+	p = skip_ws(p);
+	if (*p != ':')
+		return -1;
+	p++;
+	p = skip_ws(p);
+	if (*p != '{')
+		return -1;
+	int depth = 0;
+	const char *start = p;
+	for (; *p; p++) {
+		if (*p == '{')
+			depth++;
+		else if (*p == '}') {
+			depth--;
+			if (depth == 0) {
+				size_t n = (size_t)(p - start + 1u);
+				if (n >= out_sz)
+					return -1;
+				memcpy(out, start, n);
+				out[n] = '\0';
+				return 0;
+			}
+		}
+	}
+	return -1;
+}
+
+static int parse_bool_val(const char *s, int *out)
+{
+	s = skip_ws(s);
+	if (strncmp(s, "true", 4) == 0) {
+		*out = 1;
+		return 0;
+	}
+	if (strncmp(s, "false", 5) == 0) {
+		*out = 0;
+		return 0;
+	}
+	return -1;
+}
+
+static int parse_field_double(const char *obj, const char *key, double *dst)
+{
+	const char *p = find_quoted_key(obj, key);
+	if (!p)
+		return -1;
+	p += strlen(key) + 2u;
+	p = skip_ws(p);
+	if (*p != ':')
+		return -1;
+	p++;
+	p = skip_ws(p);
+	char *end = NULL;
+	double v = strtod(p, &end);
+	if (end == p)
+		return -1;
+	*dst = v;
+	return 0;
+}
+
+static int parse_field_uint(const char *obj, const char *key, unsigned *dst)
+{
+	const char *p = find_quoted_key(obj, key);
+	if (!p)
+		return -1;
+	p += strlen(key) + 2u;
+	p = skip_ws(p);
+	if (*p != ':')
+		return -1;
+	p++;
+	p = skip_ws(p);
+	char *end = NULL;
+	unsigned long v = strtoul(p, &end, 10);
+	if (end == p)
+		return -1;
+	*dst = (unsigned)v;
+	return 0;
+}
+
+static int parse_field_bool(const char *obj, const char *key, int *dst)
+{
+	const char *p = find_quoted_key(obj, key);
+	if (!p)
+		return -1;
+	p += strlen(key) + 2u;
+	p = skip_ws(p);
+	if (*p != ':')
+		return -1;
+	p++;
+	p = skip_ws(p);
+	return parse_bool_val(p, dst);
+}
+
+static void apply_family_block(const char *block, family_override_t *o)
+{
+	double d;
+	unsigned u;
+	int b;
+
+	if (parse_field_double(block, "print_dpi", &d) == 0) {
+		o->print_dpi = d;
+		o->mask |= OV_PRINT_DPI;
+	}
+	if (parse_field_double(block, "margin_feed_dpi", &d) == 0) {
+		o->margin_feed_dpi = d;
+		o->mask |= OV_MARGIN_FEED_DPI;
+	}
+	if (parse_field_uint(block, "margin_feed_max_dots", &u) == 0) {
+		o->margin_feed_max_dots = u;
+		o->mask |= OV_MARGIN_MAX;
+	}
+	if (parse_field_bool(block, "send_esc_ia_cut_each", &b) == 0) {
+		o->send_esc_ia = b;
+		o->mask |= OV_ESC_IA;
+	}
+}
+
+static void parse_config_json(const char *json)
+{
+	char inner[4096];
+	const char *families = json;
+
+	if (extract_object_after_key(json, "families", inner, sizeof(inner)) == 0)
+		families = inner;
+
+	char block[2048];
+	if (extract_object_after_key(families, "p700", block, sizeof(block)) == 0)
+		apply_family_block(block, &g_p700);
+	if (extract_object_after_key(families, "p900", block, sizeof(block)) == 0)
+		apply_family_block(block, &g_p900);
+}
+
+static void try_load_path(const char *path)
+{
+	char *buf = NULL;
+	size_t len = 0;
+	if (read_file_all(path, &buf, &len) != 0)
+		return;
+	parse_config_json(buf);
+	free(buf);
+}
+
+void ptouch_family_config_init_once(void)
+{
+	if (g_loaded)
+		return;
+	g_loaded = 1;
+	memset(&g_p700, 0, sizeof(g_p700));
+	memset(&g_p900, 0, sizeof(g_p900));
+
+	const char *env = getenv("LIBPTOUCH_CONFIG");
+	if (env && env[0])
+		try_load_path(env);
+	try_load_path("printer_families.json");
+	try_load_path("config/printer_families.json");
+}
+
+double ptouch_effective_print_dpi(const ptouch_printer_profile_t *prof)
+{
+	if (!prof)
+		return 0.0;
+	if (prof->family == LIBPTOUCH_FAMILY_P700 &&
+	    (g_p700.mask & OV_PRINT_DPI))
+		return g_p700.print_dpi;
+	if (prof->family == LIBPTOUCH_FAMILY_P900 &&
+	    (g_p900.mask & OV_PRINT_DPI))
+		return g_p900.print_dpi;
+	return prof->print_dpi;
+}
+
+double ptouch_effective_margin_feed_dpi(const ptouch_printer_profile_t *prof)
+{
+	if (!prof)
+		return 0.0;
+	if (prof->family == LIBPTOUCH_FAMILY_P700 &&
+	    (g_p700.mask & OV_MARGIN_FEED_DPI))
+		return g_p700.margin_feed_dpi;
+	if (prof->family == LIBPTOUCH_FAMILY_P900 &&
+	    (g_p900.mask & OV_MARGIN_FEED_DPI))
+		return g_p900.margin_feed_dpi;
+	return prof->margin_feed_dpi;
+}
+
+unsigned ptouch_effective_margin_feed_max_dots(const ptouch_printer_profile_t *prof)
+{
+	if (!prof)
+		return 0u;
+	if (prof->family == LIBPTOUCH_FAMILY_P700 &&
+	    (g_p700.mask & OV_MARGIN_MAX))
+		return g_p700.margin_feed_max_dots;
+	if (prof->family == LIBPTOUCH_FAMILY_P900 &&
+	    (g_p900.mask & OV_MARGIN_MAX))
+		return g_p900.margin_feed_max_dots;
+	return prof->margin_feed_max_dots;
+}
+
+int ptouch_effective_send_esc_ia_cut_each(const ptouch_printer_profile_t *prof)
+{
+	if (!prof)
+		return 0;
+	if (prof->family == LIBPTOUCH_FAMILY_P700 &&
+	    (g_p700.mask & OV_ESC_IA))
+		return g_p700.send_esc_ia;
+	if (prof->family == LIBPTOUCH_FAMILY_P900 &&
+	    (g_p900.mask & OV_ESC_IA))
+		return g_p900.send_esc_ia;
+	return (int)prof->send_esc_ia_cut_each;
+}
+
+const char *libptouch_printer_family_label(libptouch_printer_family_t family)
+{
+	switch (family) {
+	case LIBPTOUCH_FAMILY_P700:
+		return "p700";
+	case LIBPTOUCH_FAMILY_P900:
+		return "p900";
+	default:
+		return "unknown";
+	}
+}

src/lib/libptouch_family_config.h

@@ -0,0 +1,19 @@
+/*
+ * libptouch — printer family overrides (JSON config, optional)
+ */
+
+#ifndef LIBPTOUCH_FAMILY_CONFIG_H
+#define LIBPTOUCH_FAMILY_CONFIG_H
+
+#include "libptouch_layout.h"
+
+#include <stddef.h>
+
+void ptouch_family_config_init_once(void);
+
+double ptouch_effective_print_dpi(const ptouch_printer_profile_t *prof);
+double ptouch_effective_margin_feed_dpi(const ptouch_printer_profile_t *prof);
+unsigned ptouch_effective_margin_feed_max_dots(const ptouch_printer_profile_t *prof);
+int ptouch_effective_send_esc_ia_cut_each(const ptouch_printer_profile_t *prof);
+
+#endif /* LIBPTOUCH_FAMILY_CONFIG_H */

src/lib/libptouch_internal.h

@@ -23,8 +23,13 @@ struct libptouch_ctx {
 	uint8_t bulk_out_ep;
 	uint8_t bulk_in_ep;
 	uint16_t usb_pid; /* 0 if USB not open; used to pick 128- vs 560-dot raster */
+	char *debug_dump_path; /* strdup; NULL = 印字データのファイル保存なし */
+	int debug_dump_truncate_next; /* 次の bulk 書き込みでファイルを切り詰め（ジョブ先頭） */
 };
 
+/** 1 回の libptouch_print_raster ジョブの先頭で呼ぶ（最初の bulk 前） */
+void ptouch_debug_dump_begin_print_job(libptouch_ctx *ctx);
+
 /* ctx に最終エラー（コードとメッセージ）を記録する。公開 API のエラー返却前に使う。 */
 void ptouch_set_error(libptouch_ctx *ctx, libptouch_err_t code, const char *msg);
 /* libusb のエラー番号を人が読めるメッセージにして ptouch_set_error に渡す。 */

src/lib/libptouch_layout.c

@@ -61,9 +61,12 @@ static const ptouch_printer_profile_t ptouch_layout_profiles[] = {
 		.usb_pids = pids_128pin,
 		.model_codes = models_128pin,
 		.is_default = 0,
+		.family = LIBPTOUCH_FAMILY_P700,
 		.head_width_dots = 128u,
+		.print_dpi = 180.0,
 		.margin_feed_dpi = 180.0,
 		.margin_feed_max_dots = 900u,
+		.send_esc_ia_cut_each = 0u,
 		.tze = layout_tze_128,
 		.tze_count = sizeof(layout_tze_128) / sizeof(layout_tze_128[0]),
 		.hs = layout_hs_128,
@@ -74,9 +77,12 @@ static const ptouch_printer_profile_t ptouch_layout_profiles[] = {
 		.usb_pids = NULL,
 		.model_codes = NULL,
 		.is_default = 1,
+		.family = LIBPTOUCH_FAMILY_P900,
 		.head_width_dots = 560u,
+		.print_dpi = 360.0,
 		.margin_feed_dpi = 360.0,
 		.margin_feed_max_dots = 1800u,
+		.send_esc_ia_cut_each = 1u,
 		.tze = layout_tze_560,
 		.tze_count = sizeof(layout_tze_560) / sizeof(layout_tze_560[0]),
 		.hs = layout_hs_560,

src/lib/libptouch_layout.h

@@ -29,9 +29,13 @@ typedef struct ptouch_printer_profile {
 	const uint16_t *usb_pids;   /* 0-terminated; NULL = do not match on PID */
 	const uint8_t *model_codes; /* 0-terminated; NULL = do not match on status[4] */
 	int is_default;		    /* 1 = fallback when no other profile matches */
+	libptouch_printer_family_t family; /**< P700 / P900 系統（コマンド差の条件分岐の基準） */
 	unsigned head_width_dots;   /* 128 or 560; full raster width for pack/GF payload */
+	double print_dpi;	    /* 印字幅方向 DPI（PDF・ラスター解像度の目安） */
 	double margin_feed_dpi;     /* ESC i d feed dots per inch (PDF) */
 	unsigned margin_feed_max_dots;
+	/** ESC i A（各 n 枚でカット）を送るか（P700 系では送らない） */
+	unsigned char send_esc_ia_cut_each;
 	const ptouch_layout_row_t *tze;
 	size_t tze_count;
 	const ptouch_layout_row_t *hs;

src/lib/libptouch_media_info.c

@@ -6,6 +6,7 @@
  */
 
 #include "libptouch_internal.h"
+#include "libptouch_family_config.h"
 #include "libptouch_layout.h"
 
 #include <string.h>
@@ -34,15 +35,6 @@ static double tape_width_mm_from_code(uint8_t media_w)
 	}
 }
 
-static double print_dpi_from_profile(const ptouch_printer_profile_t *prof)
-{
-	if (!prof)
-		return 0.0;
-	if (prof->head_width_dots <= 128u)
-		return 180.0;
-	return 360.0;
-}
-
 libptouch_err_t libptouch_get_current_media_info(libptouch_ctx *ctx,
 						 libptouch_media_info_t *out_info)
 {
@@ -53,6 +45,7 @@ libptouch_err_t libptouch_get_current_media_info(libptouch_ctx *ctx,
 	}
 
 	memset(out_info, 0, sizeof(*out_info));
+	ptouch_family_config_init_once();
 
 	uint8_t st[LIBPTOUCH_STATUS_LENGTH];
 	libptouch_err_t v = libptouch_get_status(ctx, st);
@@ -85,15 +78,16 @@ libptouch_err_t libptouch_get_current_media_info(libptouch_ctx *ctx,
 
 	out_info->media_width_code = st[10];
 	out_info->media_kind_code = st[11];
-	out_info->print_dpi = print_dpi_from_profile(prof);
+	out_info->print_dpi = ptouch_effective_print_dpi(prof);
-	out_info->feed_dpi = prof->margin_feed_dpi;
+	out_info->feed_dpi = ptouch_effective_margin_feed_dpi(prof);
 	out_info->tape_width_mm = tape_mm;
 	out_info->printable_dots = print_dots;
 	out_info->left_margin_dots = left_dots;
 	out_info->right_margin_dots = right_dots;
 	out_info->min_feed_dots = 14u;
-	out_info->min_feed_mm =
+	out_info->min_feed_mm = ((double)out_info->min_feed_dots * 25.4) /
-		((double)out_info->min_feed_dots * 25.4) / prof->margin_feed_dpi;
+			      ptouch_effective_margin_feed_dpi(prof);
+	out_info->printer_family = (uint32_t)prof->family;
 
 	ptouch_set_error(ctx, LIBPTOUCH_OK, "");
 	return LIBPTOUCH_OK;

src/lib/libptouch_png.c

@@ -36,9 +36,8 @@ libptouch_err_t libptouch_png_file_to_raster(libptouch_ctx *ctx, const char *pat
 
 	*out_raster = NULL;
 	*out_raster_bytes = 0;
-	out_params->width_dots = 0;
+	memset(out_params, 0, sizeof(*out_params));
-	out_params->height_dots = 0;
+	out_params->flags = LIBPTOUCH_RASTER_FLAGS_DEFAULT;
-	out_params->margin_mm = 0;
 
 	FILE *fp = fopen(path, "rb");
 	if (!fp) {
@@ -157,6 +156,7 @@ libptouch_err_t libptouch_png_file_to_raster(libptouch_ctx *ctx, const char *pat
 	out_params->width_dots = (uint32_t)width;
 	out_params->height_dots = (uint32_t)height;
 	out_params->margin_mm = 0;
+	out_params->flags = LIBPTOUCH_RASTER_FLAGS_DEFAULT;
 	*out_raster = out;
 	*out_raster_bytes = total;
 	ptouch_set_error(ctx, LIBPTOUCH_OK, "");

src/lib/libptouch_print.c

@@ -6,6 +6,7 @@
  */
 
 #include "libptouch_internal.h"
+#include "libptouch_family_config.h"
 #include "libptouch_layout.h"
 #include "libptouch_protocol.h"
 
@@ -76,6 +77,8 @@ libptouch_err_t libptouch_print_raster(libptouch_ctx *ctx,
 		return LIBPTOUCH_ERR_IO;
 	}
 
+	ptouch_family_config_init_once();
+
 	uint8_t st[LIBPTOUCH_STATUS_LENGTH];
 	v = libptouch_get_status(ctx, st);
 	if (v != LIBPTOUCH_OK)
@@ -126,8 +129,9 @@ libptouch_err_t libptouch_print_raster(libptouch_ctx *ctx,
 		return LIBPTOUCH_ERR_ARG;
 	}
 
-	double margin_dpi = prof->margin_feed_dpi;
+	double margin_dpi = ptouch_effective_margin_feed_dpi(prof);
-	unsigned margin_max = prof->margin_feed_max_dots;
+	unsigned margin_max =
+	    ptouch_effective_margin_feed_max_dots(prof);
 	unsigned margin_dots = 14u;
 	if (params->margin_mm > 0) {
 		margin_dots = (unsigned)((double)params->margin_mm * margin_dpi /
@@ -152,26 +156,30 @@ libptouch_err_t libptouch_print_raster(libptouch_ctx *ctx,
 	pos += sizeof(raster_mode);
 
 	uint8_t esc_iz[13];
-	ptouch_fill_esc_iz(esc_iz, media_kind, media_w, lines);
+	ptouch_fill_esc_iz(esc_iz, prof, media_w, lines);
 	memcpy(head + pos, esc_iz, sizeof(esc_iz));
 	pos += sizeof(esc_iz);
 
-	static const uint8_t esc_im[] = { 0x1B, 0x69, 0x4D, 0x40 };
+	/* ESC i M: bit6 オートカット（reference/印字データ.md）。既定オフ。 */
+	uint8_t esc_im_n1 =
+	    (params->flags & LIBPTOUCH_RASTER_FLAG_AUTO_CUT) ? 0x40u : 0x00u;
+	uint8_t esc_im[] = { 0x1B, 0x69, 0x4D, esc_im_n1 };
 	memcpy(head + pos, esc_im, sizeof(esc_im));
 	pos += sizeof(esc_im);
 
 	/*
-	 * ESC i A ("cut each n labels") is not supported on PT-P710BT class
+	 * ESC i A ("cut each n labels") — P700 系では送らない（通信エラーになり得る）。
-	 * devices. Sending it can trigger a communication error (red LED blink).
+	 * 既定は系統フラグ、printer_families.json で上書き可。
-	 * Keep it only for 560-dot family.
 	 */
-	if (prof->head_width_dots > 128u) {
+	if (ptouch_effective_send_esc_ia_cut_each(prof)) {
 		static const uint8_t esc_ia[] = { 0x1B, 0x69, 0x41, 0x01 };
 		memcpy(head + pos, esc_ia, sizeof(esc_ia));
 		pos += sizeof(esc_ia);
 	}
 
-	uint8_t esc_ik[] = { 0x1B, 0x69, 0x4B, ptouch_esc_ik_value(head_dots) };
+	uint8_t esc_ik_n1 =
+	    ptouch_esc_ik_extended_mode(ctx->usb_pid, params->flags);
+	uint8_t esc_ik[] = { 0x1B, 0x69, 0x4B, esc_ik_n1 };
 	memcpy(head + pos, esc_ik, sizeof(esc_ik));
 	pos += sizeof(esc_ik);
 
@@ -187,6 +195,7 @@ libptouch_err_t libptouch_print_raster(libptouch_ctx *ctx,
 	memcpy(head + pos, mode_m, sizeof(mode_m));
 	pos += sizeof(mode_m);
 
+	ptouch_debug_dump_begin_print_job(ctx);
 	v = ptouch_bulk_send_job(ctx, head, pos, "print preamble");
 	if (v != LIBPTOUCH_OK) {
 		free(transposed);
@@ -217,21 +226,6 @@ libptouch_err_t libptouch_print_raster(libptouch_ctx *ctx,
 	}
 	free(gbuf);
 
-	/*
-	 * Some 560-dot family devices are sensitive to end-of-page sequencing.
-	 * Send FF (0x0C) then Control-Z (0x1A) on that family to explicitly
-	 * terminate page and final feed/cut.
-	 */
-	if (head_dots > 128u) {
-		static const uint8_t page_end[] = { 0x0C };
-		v = ptouch_bulk_send_job(ctx, page_end, sizeof(page_end),
-					 "print page end");
-		if (v != LIBPTOUCH_OK) {
-			free(transposed);
-			return v;
-		}
-	}
-
 	static const uint8_t print_end[] = { 0x1A };
 	v = ptouch_bulk_send_job(ctx, print_end, sizeof(print_end), "print end");
 	if (v != LIBPTOUCH_OK) {

src/lib/libptouch_protocol.c

@@ -12,28 +12,46 @@ void ptouch_fill_gf_header(uint8_t out[3], size_t line_payload_bytes)
 	out[2] = (uint8_t)((line_payload_bytes >> 8) & 0xFFu);
 }
 
-void ptouch_fill_esc_iz(uint8_t out[13], uint8_t media_kind, uint8_t media_width,
+void ptouch_fill_esc_iz(uint8_t out[13], const ptouch_printer_profile_t *prof,
-			uint32_t raster_lines)
+			uint8_t media_width, uint32_t raster_lines)
 {
+	uint8_t page_byte = 0x00u;
+	if (prof && prof->family == LIBPTOUCH_FAMILY_P900)
+		page_byte = 0x02u; /* 単一ラスター = 1 ページのみ → 最終ページ */
+
 	out[0] = 0x1Bu;
 	out[1] = 0x69u;
 	out[2] = 0x7Au;
 	/* PI flags: enable media/width/length with quality bit for broad compatibility. */
-	out[3] = 0x8Eu;
+	out[3] = 0x84u;
 	/* Use status media-kind byte directly (e.g., 0x01 laminated, 0x03 non-laminate). */
-	out[4] = media_kind;
+	out[4] = 0x00u;
 	out[5] = media_width;
 	out[6] = 0x00u;
 	out[7] = (uint8_t)(raster_lines & 0xFFu);
 	out[8] = (uint8_t)((raster_lines >> 8) & 0xFFu);
 	out[9] = (uint8_t)((raster_lines >> 16) & 0xFFu);
 	out[10] = (uint8_t)((raster_lines >> 24) & 0xFFu);
-	out[11] = 0x00u; /* first page */
+	out[11] = page_byte;
 	out[12] = 0x00u; /* fixed */
 }
 
-uint8_t ptouch_esc_ik_value(unsigned head_dots)
+uint8_t ptouch_esc_ik_extended_mode(uint16_t usb_pid, uint8_t raster_flags)
 {
-	/* Preserve legacy 560-dot behaviour (0x0C), 128-dot uses 0x08. */
+	uint8_t n1 = 0x00u;
-	return head_dots > 128u ? 0x0Cu : 0x08u;
+	int want_half = (raster_flags & LIBPTOUCH_RASTER_FLAG_HALF_CUT) != 0;
+	int want_chain = (raster_flags & LIBPTOUCH_RASTER_FLAG_CHAIN_PRINT) != 0;
+
+	/*
+	 * reference/印字データ.md:
+	 * - bit2: ハーフカット
+	 * - bit3: ChainPrint しない
+	 */
+	if (usb_pid == LIBPTOUCH_USB_PID_PTP710BT)
+		want_half = 0; /* PT-P710BT はハーフカット非対応 */
+	if (want_half)
+		n1 |= 0x04u;
+	if (!want_chain)
+		n1 |= 0x08u;
+	return n1;
 }

src/lib/libptouch_protocol.h

@@ -1,13 +1,20 @@
 #ifndef LIBPTOUCH_PROTOCOL_H
 #define LIBPTOUCH_PROTOCOL_H
 
+#include "libptouch_layout.h"
+
 #include <stddef.h>
 #include <stdint.h>
 
 size_t ptouch_line_payload_bytes(unsigned head_dots);
 void ptouch_fill_gf_header(uint8_t out[3], size_t line_payload_bytes);
-void ptouch_fill_esc_iz(uint8_t out[13], uint8_t media_kind, uint8_t media_width,
+/**
-			uint32_t raster_lines);
+ * ESC i z (13 バイト)。out[11] は prof の系統から決める（P900 の単一ページ印字では 02h、
-uint8_t ptouch_esc_ik_value(unsigned head_dots);
+ * P700 は 00h）。prof が NULL のときは 00h。
+ */
+void ptouch_fill_esc_iz(uint8_t out[13], const ptouch_printer_profile_t *prof,
+			 uint8_t media_width, uint32_t raster_lines);
+/** ESC i K の n1: flags(オート/ハーフ/チェーン)と機種制約から算出。 */
+uint8_t ptouch_esc_ik_extended_mode(uint16_t usb_pid, uint8_t raster_flags);
 
 #endif /* LIBPTOUCH_PROTOCOL_H */

src/lib/libptouch_svg.c

@@ -16,6 +16,7 @@
 #include <math.h>
 #include <stdint.h>
 #include <stdlib.h>
+#include <string.h>
 
 libptouch_err_t libptouch_svg_file_to_raster_fit_current_tape(
 	libptouch_ctx *ctx, const char *path,
@@ -51,9 +52,8 @@ libptouch_err_t libptouch_svg_file_to_raster_fit_current_tape(
 
 	*out_raster = NULL;
 	*out_raster_bytes = 0;
-	out_params->width_dots = 0;
+	memset(out_params, 0, sizeof(*out_params));
-	out_params->height_dots = 0;
+	out_params->flags = LIBPTOUCH_RASTER_FLAGS_DEFAULT;
-	out_params->margin_mm = 0;
 
 	uint8_t st[LIBPTOUCH_STATUS_LENGTH];
 	libptouch_err_t v = libptouch_get_status(ctx, st);
@@ -203,6 +203,7 @@ libptouch_err_t libptouch_svg_file_to_raster_fit_current_tape(
 	out_params->width_dots = out_w;
 	out_params->height_dots = out_h;
 	out_params->margin_mm = 0;
+	out_params->flags = LIBPTOUCH_RASTER_FLAGS_DEFAULT;
 	*out_raster = out;
 	*out_raster_bytes = total;
 	ptouch_set_error(ctx, LIBPTOUCH_OK, "");

src/lib/libptouch_trim.c

@@ -79,6 +79,9 @@ libptouch_err_t libptouch_trim_right_blank_columns(
 	out_params->width_dots = new_width;
 	out_params->height_dots = height;
 	out_params->margin_mm = in_params->margin_mm;
+	out_params->flags = in_params->flags;
+	out_params->_reserved[0] = in_params->_reserved[0];
+	out_params->_reserved[1] = in_params->_reserved[1];
 	ptouch_set_error(ctx, LIBPTOUCH_OK, "");
 	return LIBPTOUCH_OK;
 }

src/lib/libptouch_usb.c

@@ -194,5 +194,14 @@ libptouch_err_t ptouch_bulk_send_job(libptouch_ctx *ctx, const uint8_t *buf,
 		ptouch_set_error(ctx, LIBPTOUCH_ERR_USB, msg);
 		return LIBPTOUCH_ERR_USB;
 	}
+	if (ctx->debug_dump_path && ctx->debug_dump_path[0]) {
+		FILE *fp = fopen(ctx->debug_dump_path,
+				 ctx->debug_dump_truncate_next ? "wb" : "ab");
+		if (fp) {
+			(void)fwrite(buf, 1, len, fp);
+			(void)fclose(fp);
+		}
+		ctx->debug_dump_truncate_next = 0;
+	}
 	return LIBPTOUCH_OK;
 }

tests/protocol_regression_test.c

@@ -1,8 +1,18 @@
 #include "libptouch_protocol.h"
 
+#include "libptouch.h"
+
 #include <stdio.h>
 #include <stdlib.h>
 
+static const ptouch_printer_profile_t prof_fixture_p700 = {
+	.family = LIBPTOUCH_FAMILY_P700,
+};
+
+static const ptouch_printer_profile_t prof_fixture_p900 = {
+	.family = LIBPTOUCH_FAMILY_P900,
+};
+
 static int expect_int(const char *name, int got, int want)
 {
 	if (got == want)
@@ -30,20 +40,38 @@ int main(void)
 	fail |= expect_int("gf70_n2", gf[2], 0x00);
 
 	uint8_t iz[13];
-	ptouch_fill_esc_iz(iz, 0x01u, 0x0Cu, 70u);
+	ptouch_fill_esc_iz(iz, &prof_fixture_p700, 0x0Cu, 70u);
 	fail |= expect_int("iz_cmd_0", iz[0], 0x1B);
 	fail |= expect_int("iz_cmd_1", iz[1], 0x69);
 	fail |= expect_int("iz_cmd_2", iz[2], 0x7A);
-	fail |= expect_int("iz_n1_flags", iz[3], 0x8E);
+	fail |= expect_int("iz_n1_flags", iz[3], 0x84);
-	fail |= expect_int("iz_media_kind_passthrough", iz[4], 0x01);
+	fail |= expect_int("iz_media_kind_fixed", iz[4], 0x00);
 	fail |= expect_int("iz_media_width", iz[5], 0x0C);
 	fail |= expect_int("iz_lines_lsb", iz[7], 70);
-	fail |= expect_int("iz_page_index", iz[11], 0x00);
+	fail |= expect_int("iz_page_control_p700", iz[11], 0x00);
 	fail |= expect_int("iz_last_fixed", iz[12], 0x00);
 
-	/* ESC i K mode byte: 128-dot vs 560-dot families */
+	ptouch_fill_esc_iz(iz, &prof_fixture_p900, 0x0Cu, 70u);
-	fail |= expect_int("esc_ik_128", ptouch_esc_ik_value(128u), 0x08);
+	fail |= expect_int("iz_page_control_p900_single", iz[11], 0x02);
-	fail |= expect_int("esc_ik_560", ptouch_esc_ik_value(560u), 0x0C);
+
+	/* ESC i K: bit2=ハーフカット、bit3=ChainPrintしない */
+	fail |= expect_int(
+		"esc_ik_p750w_half_chain",
+		(int)ptouch_esc_ik_extended_mode(
+			LIBPTOUCH_USB_PID_PTP750W, LIBPTOUCH_RASTER_FLAGS_DEFAULT),
+		0x04);
+	fail |= expect_int(
+		"esc_ik_p710bt_no_half",
+		(int)ptouch_esc_ik_extended_mode(
+			LIBPTOUCH_USB_PID_PTP710BT, LIBPTOUCH_RASTER_FLAGS_DEFAULT),
+		0x00);
+	fail |= expect_int(
+		"esc_ik_p900w_auto_half_no_chain",
+		(int)ptouch_esc_ik_extended_mode(
+			LIBPTOUCH_USB_PID_PTP900W,
+			LIBPTOUCH_RASTER_FLAG_AUTO_CUT |
+				LIBPTOUCH_RASTER_FLAG_HALF_CUT),
+		0x0C);
 
 	return fail ? EXIT_FAILURE : EXIT_SUCCESS;
 }